Time Lapse Photography

Previous  Top  Next

The Time Lapse Feature in ToneUp has two modes.

   Setup

When you first open the Camera Control (Time Lapse) Window you will need to select the camera you wish to use. ToneUp will present you automatically with a list of all USB devices connected to your PC, please select your camera.

   Continuous

In Continous mode ToneUp will take the specified number of shots every N seconds. For example, if you enter 10 shots with a delay of 5 seconds ToneUp will take a shot every 5 seconds for 50 seconds (until all 10 shots have been taken).

   Single-Shot

In Single-Shot mode ToneUp will take one shot at a time and transfer it back to the PC's harddrive. To start with you will need to select the folder you wish your images to be saved into. It is recommended that you select (or create) an empty folder each time you start a shoot. Once you have selected a folder simply click "shoot" to take a shot. After the shot has been taken you will see the camera transfering the image to the PC's harddrive (this will take approximately 5-10 seconds, depending on the resolution of the image). The Image Browser will now automatically open and show your image. (Recommendation - open the Image Browser before starting Time-Lapse photography and adjust it to the size/position you like).