|
Uploading / Downloading Curves (Nikon Only)
|
Previous Top Next |
| Once you have created (or loaded) a curve you can upload it into the camera using the menu Option "Camera / Upload Curve".
|
|
|
| When you select this option you will see a progress bar showing when the upload will be completed, which will normally take less than 2 seconds.
|
|
|
| You can also download curves from the camera using the "Camera / Download Curve" menu option.
|
|
|
| NB. Both of these options are only available if you have the camera connected and switched on before starting ToneUp. If you are still unable to upload to the camera please read the FAQ at the end of this manual.
|
|
|
| Quick Set Curves
|
|
|
| The Quick Set option allows you to fill 5 slots with your favourite curves so you can quickly upload them without having to locate, load and upload them.
|
|
|
| To remove a Quick Set curve you must select it and then click "reset ticked slot".
|